The secret to the success of songs can sometimes rely on the manner that it was recorded. It is the reason why as a musician, you need to know how to record crisp, rich instrument tracks and vocals in any type of recording environment. And because recording a song is a complex process, simple things such as the positioning of the microphone(s) can greatly alter the quality of your music.
As a musician, it pays to have knowledge about arranging, creating grooves and beats, writing harmonies and counterpoint melodies and balancing levels. The more knowledge you have about how sound works, the better you can command just how you want things to sound or how you want the vocals to stand out.
Recording techniques and equipment have evolved over the years and unlike in the 18th century when musicians can only use cylinder phonograph as a practical sound recording and playback device, soloists and instrumentalists now have myriad of options when it comes to the equipment they’ll use in recording vocals and tracks.
In the early years, there was no way to experiment with different methods or instruments. If a musician wants to hear his performance, he has to use master discs. It wasn’t until the 20th century that people learn how to use the horn to apply vibrations and add groove effects to the recordings in master discs. But, this process was complex as it requires everything to be recorded at the same time and the volume of each instrument or voice was dependent on their distance from the recording equipment.
Thankfully, the advancement in technology now allows musicians to create that awesome sound we all love. Here are some of the best recording techniques to date:
In Studio Recording
The most important things in music production are the vocals, however, the recording for louder instruments like drum kits, brass or string sections is also crucial if you want your music to stand out.
If you’re recording vocals, special or big rooms aren’t necessary as long as the recording studio has been carefully picked. Make sure that the room is quiet and away from distractions, has good ambiance and has comfortable room temperature to keep instruments in tune.
When recording in studios, bear in mind that you will need one mic for each sound source (eg. one for voice, one for guitar) and it’s recommended that you position each mic 15cm from the source for best results. If you will be needing to record complex sound sources such as a piano or a drumkit, it’s recommended that you get microphones that come as matched pairs. This way, you’ll have maximum audio fidelity and control over the sound.
You also need to make sure that you pick the best mic according to the functionalities you need. For example, if you’re recording vocals, you need a mic like RODE NT1-A which eliminates the p’s, ph’s, f’s or the ‘plosives’.
Equipment you’ll need: computer, recording software, pop shield, microphone (you can choose between condenser mics, dynamic mics or ribbon mics depending on the purpose of your recording and other instruments you’ll use).
For more tips and techniques for in studio recording, watch this video.
Although this recording technique is not very modern and is a bit controversial because it’s associated with hidden and subliminal messages, backmasking is still worthy to be included in this list. As the name implies, backmasking records sound or message backward on to a track that is meant to be played forward.
This technique was popularized by The Beatles after their album Revolver was released in 1966. Backmasking is now being used for artistic, comedic and satiric effect, on both analog and digital recordings. It is also used to censor words or phrases in rap songs.
Large Rooms Recording
Some musicians avoid recording in open spaces or large rooms because of extra reverb it generates. When recording in large rooms, it’s relatively harder to isolate the sound. But, if you need to overdub pop music vocals, this setup is recommended.
Large room recordings allow sound engineers and producers to add ambient effects in the final mix. The recordings will also have little to no acoustic stamp if done in a large room. In order to produce the sound quality you’re after, you can either place mics strategically around the space (in addition to close mics on the drums and overheads) or place tall baffles or gobos around the singer and mic to stop most of the room’s sound from being recorded along with the singer. You can also hang duvets or heavy blankets behind the singer and at the sides of them so that the nearest walls don’t reflect much sound to the mic.
Watch this video to learn how different room sizes affect the quality of the recording.
This recording technique produces a deeper and wavy effect to kick drums. If you want to record vocals using this technique, all you need to do is place a well-wrapped mic into a bucket or tub of water and set it at the base of the drum. The underwater mic will then capture low, wobbly sounds that ebbs and flows just like waves of the ocean. You can also use metal, wooden, and plastic containers to produce subtle variations or add channel modulation effects.
If your aim is to get dry vocals or dry sounds, recording in small rooms will do the trick. It is possible to get a respectable dry vocal sound by hanging a couple of duvets or towels behind or around the singer. Small room recordings can actually sound great if you add a small amount of reverb or similar effect to the mix. Just note that short echoes can occur which create unwanted comb filter effects, making the sound thin and washed out.
Generally, the quality of sound and music produced from small room recordings depend heavily on the kind of microphones you use and the way you position them. Using close mic technique on a dynamic mic like the SM7B works best for small room recordings. It is also a must that you use amplifiers that accurately capture the sound of the guitar and other sound sources around it.
Find out how small room recordings sound by watching this video.
This recording technique is perfect for artists who love connecting with their audience. In sightlines recordings, producers and engineers act as listening audience while the song or performance is recorded. This way, the artists will feel “reassured” and confident, resulting in a better performance.
Although there is no real evidence that this technique produces better music or sound quality, some artists prefer to use it because they find it comfortable and they can get feedback from their audiences in real time.
The Trash Mic
Trash mic is a microphone (usually a dynamic mic like an SM57) used to record anything including vocals, guitars, or drums. It can be placed above the drummer to capture and manipulate the overall sound of the instrument later. The trash mic gives a lo-fi sound and when combined with other drum mics, it can be used as a special effect and can be blended to taste.
Learn more about recording and the use of trash mic here.
The singer’s station is often used by amateur singers, musicians with a limited budget and those who want to record music in the comforts of their home. It consists of a boom mic stand to hang the mic over and above the music stand, microphone, pop filter (optional), and headphones.
The quality of sound and music recorded using this technique is often affected by foot tapping and sound reflections coming from the floor. It’s recommended to use soft cloth material to cover the metal music stand and to place the entire station on a rug or carpet. Doing so will allow you to accurately assess vibrations.
To learn how to properly set up your singer station, watch this video.
There are a lot of recording techniques you can try depending on your preferences, sound requirements, and equipment. Try at least one of the above techniques and let us know about your experience!
About the author: Edward Mellett is the passionate founder of WikiFestivals, a global community for festival fans.
- 7 Steps to Better Guitar Recordings in the Studio
- How Room Acoustics Impacts Your Guitar Tone
- 2017 Jamstik+ Review – The Ultimate MIDI Controller for Guitarists